JOE Construction Supplies Trading
- (+63) 270004521 | (+63) 917 153 8299
- arianne2014.joe@gmail.com
- Mon - Fri | 8:00am - 5.00pm
Menu
JOE Construction Supplies Trading
Drilling Rig for drilling Angular holes from 10 degree horizontal to Vertical to a depth of 10 meters. specially used for drilling Grout holes for Strengthening of Foundation.
It is designed for drilling with DTH hammer or rotary drag bits up to a depth of 10 meters using 76 mm DTH drill rods. Depending on geological formations, compressor capacity, skill of the operator and weight of the tools being used greater or less depths may be achieved.
Air compressors commonly power pneumatic tools such as jack hammers and pick hammers.
Screw compressors are made with the highest standards to deliver reliable air power wherever it is required.
Grout Pumps is designed to pump most types of cementitious grouts for filling hollow concrete block walls, under machine bed plates, ground stabilization, general void filling and grouting metal door frames.
WIRE DIAMETER : 2.7 mm
MESH SIZE: 8X10 Cm
WIDTH & LENGTH: 2.9 X 30m/roll
WIRE DIAMETER : 3.0 mm
MESH SIZE: 70 X 130 mm
WIDTH & LENGTH: 3.5x30/roll
DIAMETER : 32mm GRADE 60
SIZE: 4 mtrs – 6 mtrs
THICKNESS: 8 mm
DIMENSION: 12MM 1/2
16MM 5/8
WIRE DIAMETER : 2.7 mm
MESH SIZE: 8X10 Cm
WIDTH & LENGTH: 2.9 X 30m/roll
WIRE DIAMETER : 3.0 mm
MESH SIZE: 70 X 130 mm
WIDTH & LENGTH: 3.5x30/roll
DIMENSION: 14.5 MM
WIRE DIAMETER : 12 mm
10 mm
16 mm
WIRE DIAMETER : 2.7 mm
MESH SIZE: 8X10 Cm
WIDTH & LENGTH: 2.9 X 30m/roll
WIRE DIAMETER : 3.0 mm
MESH SIZE: 70 X 130 mm
WIDTH & LENGTH: 3.5x30/roll
DIMENSION: 2 ½ 55 MM
info not available